Esptool is a versatile and powerful utility that has gained popularity in the world of IoT (Internet of Things) and embedded systems. Developed by Espressif Systems, a company renowned for its contributions to the ESP8266 and ESP32 microcontroller platforms, esptool is an indispensable tool for flashing firmware, managing memory, and debugging ESP-based devices. In this […]
The ATTiny212/412 microcontrollers are using the high-performance low-power AVR® RISC architecture, and is capable of running at up to 20MHz, with up to 2/4KB Flash, 128/256bytes of SRAM and 64/128bytes of EEPROM in an 8- pin package. The series uses the latest technologies with a flexible and low power architecture including Event System and Sleepwalking, accurate
ATTiny212 – Pinout Read More »
We have used a legacy GNU Makefile build in the previous HomeKit LED Example. Now need to migrate to CMake. A lot of people first getting into this wonderful space of embedded system design do so through Arduino, which uses C++ with many built-in functions. The new ESP-IDF uses CMake to configure the build system.
ESP32 – HomeKit LED – Part II Read More »
The ATTiny204/404 microcontrollers are using the high-performance, low-power AVR® RISC architecture, and are capable of running at up to 20 MHz, with up to 2/4 KB Flash, 128/256 bytes of SRAM, and 64/128 bytes of EEPROM in a 14-pin package. The series uses the latest technologies with a flexible and low-power architecture including Event System and
ATTiny204 – Pinout Read More »
Have you ever thought that when you complete the design on KiCad, you can place an order on PCBWay with just one click? Now this idea is finally achieved. PCBWay has launched a plugin that does just that! How does it works When you click PCBWay Plug-in button on Kicad, see the red circle below
KiCAD – PCBWay Plugin Read More »
The ATTiny202/402 microcontrollers are using the high-performance, low-power AVR® RISC architecture, and are capable of running at up to 20 MHz, with up to 2/4 KB Flash, 128/256 bytes of SRAM, and 64/128 bytes of EEPROM in an 8-pin package. The series uses the latest technologies with a flexible and low-power architecture including Event System and
ATTiny202 – Pinout Read More »
This Project is featured on instructables! The jack-o’-lantern has a long history with Halloween, although our favourite demonic faces haven’t always been carved out of pumpkins. Their origin comes from an Irish myth about Stingy Jack, who tricked the Devil for his own monetary gain. When Jack died, God didn’t allow him into heaven, and the
Halloween – Jack O’ Lantern Read More »
We start this blog series with the reviewed of the ATTiny 0-series then 1-series en at least the 2 series range of chips from Microchip. An impressive matrix of parts with a consistent set of peripherals, and covering a wide range of application requirements from 8 to 24 pins and 2K to 32K of flash
ATTINY 0/1/2 Series – Pinout Read More »
Maybe you want to make a PCB with SMD components. To do this, you need a so-called reflow oven. Various projects can be found on the internet to make such an oven. But here comes the problem, most projects use a custom PCB based on SMD components. This is the same if you contact the
UPDI? Never heard of it? You may be familiar with the ATtiny series of microprocessors from Microchip, such as the ATtiny85 or ATtiny2313. These chips powered small systems like the Digispark series. Unfortunately, they had limited Flash (usually no more than 8K) and even more limited RAM (usually less than 1K). Now a new series
